Office of Security Administration The Office of Security Administration partners with staff across the Division of Finance and Administration to develop and support processes that strengthen internal controls, ensure compliance, promote best practices in higher education, and enhance overall efficiency and effectiveness. To contact the Office of Operational Excellence, send an email to cpi-security@astate.edu. Pre-Security Requirements   All employees are required to complete the following courses in the Employee Learn Center   module within their first 30 days of employment. Child Maltreatment Title IX (Sexual Discrimination) Privacy and Security FERPA   Once  the required training module has been completed, the appropriate security request form may be submitted.         Security Banner Access Security Form  Utilized for finance initiator/approvers, supervisors and leave/time approvers and their proxies, travel and expense, and student accounts receivable access. Please contact cpi-security@astate.edu for further assistance with Finance and Travel security. Banner Student Security – Maintained by the Registrar’s Office for Banner Student module access. FERPA training is required for employees who request access to student information. Please contact registrar@astate.edu for further assistance with Banner Student security. Non-Employee Sponsored Account – Submitted by an Employee who is sponsoring a non-employee/privatized employee for an A-State account and/or system access. Any individual who is not paid by the University and needs access must be set up through this process. VPAT-Technology Accessibility When purchasing web or other IT products, departments must ensure that they are accessible to everyone, including users with disabilities. The State of Arkansas is required to comply with the provisions of Arkansas Code Annotated §25-26-201 et seq., as amended by  Act 308 of 2013 and the Government-wide Section 508 Accessibility Program prior to procuring a technology product or when soliciting the development of such a product. Arkansas Code §25-26-201 expresses the policy of the State to provide individuals who are blind or visually impaired with access to information technology purchased in whole or in part with state funds.   Departments are responsible for obtaining a Voluntary Product Accessibility Template (VPAT®) from the vendor and submitting the required documentation for review prior to the procurement of such technology.  VPAT Review Process   VPAT® (Voluntary Product Accessibility Template) is a template used to document a product's conformance with accessibility standards and guidelines. For web-based products , the accepted VPAT® is the current WCAG Edition made available from the Information Technology Industry Council   For other products , the accepted VPAT® is the current  Revised Section 508 Edition available from the Information Technology Industry Council When requesting a quote for a technology purchase please ask the vendor if they have a VPAT® or if they are willing to complete one. If they cannot, the process can continue, but it is recommended that an alternative vendor and/or product be sought. You can also try doing a web search for the terms "508" or "VPAT" along with the product and/or vendor name as many manufacturers publish these documents to their websites. First, review the VPAT® and if "Partially Supports" or "Does Not Support" appears in the column then the product is not fully accessible. Ask the vendor for a remediation road map if this is the case. Second, a basic accessibility evaluation consists of testing out usage of the product with keyboard-only navigation and compatibility with screen reading software. Tools to complete this can be found in #3. One of the following checklists can be completed, with optimum effort, to aid in the overall VPAT® evaluation: Software Accessibility Checklist Web Accessibility Checklist For assistance in completing these checklists, please contact Marcus Carlton at 972-2011  or vpat@astate.edu . In order for our office to evaluate, we must have a demo or trial version of the product. Simply provide a link and/or provide any login credentials for the demo and send to vpat@astate.edu . The following resources can be used to assist in completion of VPAT® testing: Screen Readers Desktop Software, Web Sites, or Web Services: JAWS , NVDA , Apple Voiceover Mobile software:  Android Accessibility for Android or  Voiceover for iOS are default programs Keyboard Windows shortcuts Mac shortcuts Magnifiers Windows  magnifiers Mac  zoom Site Scans Use  WAVE (Web Accessibility Evaluation Tool)  to scan web sites for accessibility flaws Testing Tools for Web ANDI (Accessible Name & Description Inspector) free open-source bookmarklet, which means that the tool does not require installation as a plugin and can be added to multiple browsers as a bookmark. Install ANDI Color Contrast Analyzer (CCA)  free open-source tool that displays the contrast ratio for two selected colors. CCA is used to inspect color contrast when contrast cannot be programmatically identified by ANDI. CCA 2.5 for Windows CCA 2.4 for macOS The  Technology Accessibility Overview Form should be completed for every VPAT® evaluation request. The form asks details such as requestor information, technology details, and contains the approval signature. It is used to provide details that may aid in the overall evaluation. Once completed, a copy of the form will be automatically sent to our office. Submit all VPATs and other documents, as well as the information to download or log into a demo to vpat@astate.edu or hand deliver the documents to the Administration Building - Office of Finance, Attention: George Hannah or Marcus Carlton. Once the product has been approved for accessibility and other criteria met, the department may submit a Banner requisition to Procurement Services. Once the product has been approved for accessibility and other criteria met, the department may submit a Banner requisition to Procurement Services. All technology purchases must have an ASU_ITS_Security Questionnaire completed by the vendor or on file before the purchase can be made. Contact the Information Technology Security team for questions and to submit. For all types of technology, Pcard usage must be approved by Procurement Services before the purchase can be made.   Tips and Troubleshooting BROWSER For each browser(s) used, follow the steps below to resolve common issues. It is recommended that the computer be restarted following any changes. SETTING THE BROWSER TO CLEAR CACHE WHEN CLOSING Chrome: Open the Chrome browser. Open the Chrome Toolbar (3 lines to the right of the URL window) and then select  Settings. Select  Show advanced settings.... Click the  Content Settings button  located under the Privacy section. Under the first section labeled Cookies, select  Keep local data only until you quit your browser. Click  Done. Firefox: At the top of the Firefox window, click the Firefox button and then select  Options .  Select the Privacy panel . In the  History  section, set  Firefox will : to  Use custom settings for history . Select the checkbox for  Clear history when Firefox closes . Click the  Settings ...button. The Settings for Clearing History window will open. In the Settings for Clearing History window, click the checkmark box next to  Cache . Click  OK . Internet Explorer: Open the IE browser. Click  Tools > Internet Options > Advanced  tab. Scroll down to the Security section and then check the box:  Empty Temporary Internet Files folder when browser is closed . Click  OK . ALLOWING POP-UPS IN BROWSERS Chrome: To the far right of the address bar click the ellipsis.  At the bottom of the  Settings  page click  Advanced . Under the Privacy and Security section click  Content Settings  >  Pop-ups and redirects. Enable or disable the slider to block or allow all pop-ups. Additionally specific sites can be blocked or allowed. Firefox: To the far right of the address bar click the Open Menu icon.  Click  Options . Click  Privacy and Security  from the menu and under Permissions, either check or uncheck the box labeled "Block pop-up windows." Safari: Click  Safari  on the menu followed by  Preferences . Click the  Security  tab. Either check or uncheck the "Block pop-up windows" field. To allow website exceptions use a supporting browser such as Chrome or Firefox. Alternatively,  Shift  +  Command  +  K . Internet Explorer: To the far right of the address bar click the gear icon.  Click  Internet Options . Select the  Privacy  tab and either check or uncheck the "Turn on Pop-up Blocker" field. Click  Apply . Edge: To the far right of the address bar click the ellipsis.  Click  Settings . Under the Advanced Settings section click the " View Advanced Settings " button. Use the  Block pop-ups  slider to make changes. OPENING A PRIVATE BROWSING WINDOW Chrome: To the far right of the address bar click the ellipsis.  Click  New Incognito Window  ( Ctrl  +  Shift  +  N ). To end private browsing close the open window and click the ellipsis >  New Window  ( Ctrl  +  N ). Firefox: Click the Open Menu icon to the far right of the address bar.  Click  New Private Window  ( Ctrl  +  Shift  +  P ). To end private browsing close the open window and click the Open Menu icon >  New Window  ( Ctrl  +  N ). Safari: Click the  File  Menu, then click  New Private Window  ( Command  +  Shift  +  N ). To end private browsing close the open window and click  File  >  New Window  ( Command  +  N ). Internet Explorer: To the far right of the address bar click the gear icon.  Click  Safety  >  InPrivate Browsing  ( Ctrl  +  Shift  +  P ). To end private browsing simply close the open window ( Ctrl  +  N ). Edge: To the far right of the address bar click the ellipsis.  Click  New InPrivate Window  ( Ctrl  +  Shift  +  P ). To end private browsing close the open window and click the ellipsis >  New Window  ( Ctrl  +  N ). RESETTING BROWSERS In the event that common web browser troubleshooting is not helpful, a browser reset may be required. Please keep in mind that resetting the browser will revert all startup tabs, homepages, content settings, and all other customized preferences back to their installation defaults. It is recommended that the computer be restarted following any changes. Chrome: To the far right of the address bar click the ellipsis.  Click  Settings At the bottom of the  Settings  page click  Advanced . Under the Reset and clean up section click " Restore settings to their original defaults ." Firefox: To the far right of the address bar click the Open Menu icon.  Click  Help  >  Troubleshooting Information . In the top right of the newly opened window click the  Refresh Firefox  button and confirm the reset. Safari: Click  Safari  on the menu followed by  Preferences . Click the  Privacy  tab. Click " Remove All Website Data " and select  Remove Now . Internet Explorer: To the far right of the address bar click the gear icon.  Click  Internet Options . Select the Advanced tab and click  Reset  under Reset Internet Explorer settings. Ensure that the  Delete personal settings  box is checked and click  Reset . Edge: To the far right of the address bar click the ellipsis.  Click  Settings . Under the Clear browsing data section click the " Choose what to clear " button. Ensure that all boxes are checked and click  Clear . Chrome: To the far right of the address bar click the ellipsis.  Click  Settings. At the bottom of the  Settings  page click  Advanced. Under the Privacy and Security section click  Clear browsing data. Ensure that all desired check boxes are marked for deletion and click  Clear data. Alternatively,  Shift  +  Ctrl  +  Delete  >  Clear data. Firefox: To the far right of the address bar click the Open Menu icon.  Click  Options. Click  Privacy & Security  from the menu and click  Clear data  and  Clear history  under their respective sections. Ensure that desired boxes are checked before clearing. Safari: Click  Safari  on the menu followed by  Preferences. Click the  Privacy  tab. Click  Manage Website Data  >  Remove all. Alternatively,  Command  +  Option  +  E. Internet Explorer: To the far right of the address bar click the gear icon.  Click  Internet Options . Select the  General  tab and click  Delete  under Browsing History. Ensure that the desired boxes are checked before deleting. Click  Apply . Alternatively,  Ctrl  +  Shift  +  Delete. Edge: To the far right of the address bar click the ellipsis.  Click  Settings . Click the  Choose What to Clear  button under Clear Browsing Data. Ensure that the desired boxes are checked before clearing. Alternatively,  Ctrl  +  Shift  +  Delete. Training Guides & Information Required Trainings The following trainings are required for  all employees  and should be completed within 30 days of hire:   FERPA Child Maltreatment Title IX Data Privacy and Security Access these trainings through the Employee Learn Center in Pack Portal Contact Cathy Naylor  (8079) for help and questions.   Most of our training content can now be found in the Employee Learn Center .      General Training The  Course Catalog  and  Find Learning  pages of the  Employee Learn Center  can direct you to the many courses available to you. Other general training options for the campus are listed below. Many campus service areas are available for departmental trainings upon request.   Training Topic Access/Contact Additional Information Access and Institutional Engagement Dr. Carlitta Moore Introductory Video Access and Accommodation Services Dominique White Introductory Video Multicultural Affairs Dr. Latika Johnson Available for Departmental Trainings upon request CPR Class Spencer Bradley Fees apply Slow Moving Vehicle Safety Learn Center Required for all golf cart users     Recommended Training By Position Click the contact name to let them know you plan to attend their scheduled training or to request a training session. Administrative Specialist / Analyst and Fiscal Support positions may need some combination of the following trainings   Topic Schedule Location Access/Contact Banner Budget Fourth Thursday of the month 9:00-12:00 Admin Building, Conference Room A Janet Moore Banner Finance     Learn Center - Banner and SSB9 Catalogs Banner Student Module Training (Academic Units) Every Wednesday 10:00 AM Via Zoom Jesse Blankenship Banner Procurement (Guidelines, Requisitions, Receiving) by request   Mike Smith  / Learn Center EPAF (Payroll, Electronic Personnel Action Form) Second Thursday of the month 2:00 - 4:00 Admin Building, Conference Room A Angela Gibson P-Card Reconciliation (Concur) by request   Mike Smith  / Learn Center Sponsored Program Accounting (Grants) by request   Sponsored Programs Taleo Admin Training (Hiring Process) First Thursday of the month 3:00 - 4:00 Admin Building, Conference Room A Kristin Carson Travel (Concur) by request   Billy Hogue  / Learn Center   Faculty and Adjunct positions  may need some combination of the following trainings:     Training Topic Access/Contact Banner Finance (If managing/approving a budget) Learn Center - Banner and SSB9 Catalogs Banner Student Registrar's Office Travel (Concur) Billy Hogue  / Learn Center Sponsored Program Accounting (Grants) Sponsored Programs New Faculty Orientation Learn Center Faculty Professional Development and Training Guides CETL   Facilities Management positions   may need some combination of the following trainings:     Training Topic Access/Contact Fork Lift Safety Learn Center Slow Moving Vehicle Safety Learn Center Other Health/Safety Trainings Learn Center CONTACT TRAINING & DEVELOPMENT Cathy Naylor Phone: 870-680-8079